Square Counter-Flow Cooling Tower
The overall structure is solid and light. The main body and water
pan are made of reinforced fiberglass (F.R.P), which will not
corrode. The surface paint is added with UV inhibitors to resist
the damage of sunlight. The specially designed PVC water collector
(water stop) is used to prevent flying and splashing. The pressure
drop loss is slight, and the splash loss is less than 0.002%.
Product Features
1. LYN is a square connectable combination, which makes full use of
space and saves space; the product is specially designed with low
noise and high efficiency.
2. All steel materials are hot-dip galvanized, corrosion-resistant
and durable.
3. The specially designed PVC water collector (water stop) is used
to prevent splashing, with slight pressure drop loss and splash
loss below 0.002%.
4. Honeycomb vacuum-formed heat dissipation material is used,
staggered arrangement.
5. The overall structure is solid and lightweight, and the body and
water tray are made of reinforced fiberglass (F.R.P), which will
not corrode. The surface paint plus ultraviolet inhibitor can
resist sunlight invasion and damage
6. The specially designed axial flow fan is equipped with a belt
reducer, low noise, sufficient air volume, and a special water drop
silencer blanket can be installed to eliminate water sound.
7. The specially designed water diffuser has a large diameter and
will not be blocked, but the water dispersion effect is excellent.
It is installed inside the tower body and is not polluted by
external dust and debris.
8. The water pan is tilted for easy cleaning, requires less water,
and has a lower operating weight, but the water tank is extra large
so there is no need to worry about air inhalation.
Component Features
Cooling tower motor
Waterproof motor, protection level up to IP55, motor shaft
chrome-plated for corrosion protection, insulation level F; the
motor has the advantages of low noise, low vibration, wide voltage,
high efficiency, sealed and waterproof, etc. Rated voltage: 380V,
frequency 50HZ.
Special fan for cooling tower
Made of aluminum alloy, with wide blades and wing hollow blades.
Large air volume, low noise, high efficiency, low energy
consumption. A scale is provided for manual adjustment of the fan
angle. With good high-strength wind, streamlined design, smooth air
flow.
Sprinkler
Design: Centrifugal DC nozzle is used, and the hollow phenomenon
has been considered in the design. It is suitable for a larger
pressure change range and has a better spraying effect. The
required pressure is low and it is economical to use. Production
process: Hot injection molding is adopted, which is not easy to
deform or clog, and is easy to clean: Features: The ABS sprinkler
head on the branch pipe has the advantages of providing uniform
water flow, low pump head, and not easy to clog. This design
ensures uniform water dispersion, high performance, and easy
installation and maintenance.
Reduction unit
Adopts belt drive, stable operation, and low noise. The upper and
lower covers of the belt box are designed to protect it from
external water vapor. FRP material, safe operation, easy operation
and maintenance. High-grade imported belts are used to ensure the
strength and life of use.
Shell
The outer wave plate and water tray of the tower body are made of
fiberglass reinforced plastic (FRP). FRP uses water-resistant resin
and alkali-free glass fiber felt, which has good wettability, high
glue content, high strength, high surface finish, and is not easy
to fade, anti-aging, anti-ultraviolet, and beautiful appearance.
The air inlet is equipped with a downwind plate, which is extruded
and drawn out of high-grade PVC, engineering plastics, and
anti-ultraviolet agents. It is dense and durable, rectifies the
incoming air, and has a water-blocking function.
Filler
High-grade PVC raw materials are vacuum-formed, and the sheet
thickness is uniform, and the strength and toughness are high. The
opaque, UV-resistant material is used, combined with the "Liang Yi"
patented corrugated design, to obtain a larger heat exchange area
and better airflow through the space. The corrugation of the sheet
and the distance between the sheets are obtained through strict
calculation and multiple tests, and the heat dissipation
coefficient is high.
